Filter
Top Products
36
Keystone
This function corrects distortion of a projected image. Select either
Store or Reset with the Point
7 8 buttons, and then press the Select
button. The keystone dialog box appears. Adjust keystone with the
Point
eedd
7 8 buttons.
Store . . . . . stores the keystone adjustment even if the AC power
cord is disconnected.
Reset . . . . .resets the keystone adjustment when the AC power
cord is disconnected.
Setting Menu
Press the MENU button to display the On-Screen Menu. Press
the Point
7 8 buttons to move the red frame pointer to the
SETTING icon.
1
2
Language
Language used in the On-Screen Menu is selectable from among
English, German, French, Italian, Spanish, Portuguese, Dutch,
Swedish, Russian, Chinese, Korean and Japanese.
Display
This function decides whether to display On-Screen Displays.
On . . . . . .show all the On-Screen Displays.
Off . . . . . .set On-Screen Displays disappeared except;
• On-Screen Menu
• “Power off?” message ( ☞ P17 )
• P-TIMER ( ☞ P21)
• “No signal” message ( ☞ P37 )
• ”Wait a moment!” message
Set the red frame
pointer to the item
and press the
SELECT button.
Press the Point d button to move the red frame pointer to the
item that you want to set. Then press the SELECT button to
display the Setting dialog box.
Blue back
When this function is “On,” the projector will project a blue image
on the screen if any input signal is not detected.
Logo
This function decides what to be displayed on the starting display.
User ···· the image you captured
Default ···· the factory set logo
Off ···· count-down only
Press the SELECT button
at Language to show the
Language Menu.
SETTING MENU
Capture
This function is used to capture the image being projected and use it
for a start-up display. After capturing the projected image, go to the
Logo function (above) and set it as “User”. Then the captured
image will be displayed when turning on the projector next time.
To capture the image, select "Yes". To cancel the Capture function,
select "No".
Before capturing an image, select Standard in the Image Select
Menu to capture a proper image. ( ☞ P27, P33 )
A signal from a computer can be captured up to XGA (1024 x 768).
A signal from video equipment can be captured except for 720p,
1035i, and 1080i. When capturing the image that has been adjusted
by Keystone function, the adjusted data is automatically reset and
the projector captures an image without keystone adjustment.
Select [Yes] to capture
the projected image.
Select [No] to cancel.
Select [Yes] to
stop capturing.
Capture
Setting Menu icon
Setting