Filter
Top Products
Focus Spot 250™
©Elation Professional® - – Focus Spot 250™
Note:
After switching on, the Focus Spot 250™ will automatically detect whether DMX 512 data is
received or not. If the data is received, the display will show "A.XXX" (XXX representing the
actual DMX address). If the fixture is not receiving DMX signal the display will flash "A.XXX"
(XXX representing the actual DMX address). This situation can occur if:
- the 3 PIN XLR plug (cable with DMX signal from controller) is not connected with the input
of the machine.
- the controller is switched off or defective, if the cable or connector is defective or the signal
wires are swap in the input connector.