Filter
Top Products
1
1-2
Departmental Switch Model DS-16B2 Fabric OS Procedures Manual
Setting the Initial Switch Configuration
Logging In to a Switch
The switch must be connected to an IP network through the RJ-45 port to
enable a connection through Telnet. Refer to the Departmental Switch DS-16B2
Hardware Reference Manual for more information about connecting the switch
to your IP network.
To log into a Departmental Switch DS-16B2 switch:
1. Open a Telnet connection to the switch. The login prompt
displays if the Telnet connection successfully found the switch in
the network.
The default IP address is 10.77.77.77
2. At the login prompt, enter the user ID that you use to login, for
example:
login: admin
The password prompt displays if the user exists.
3. Enter the
password for the user:
password: xxxxxx
The default password is password.
If the login was successful, a prompt displays showing the name of
the switch and user ID you are logged in as, for example:
switch55:admin>