Filter
Top Products
3
3-6
Departmental Switch Model DS-16B2 Fabric OS Procedures Manual
Displaying Error Logs and Status
Displaying the Uptime of the Switch
To display the uptime for a switch:
1. Log in to the switch as the admin user.
2. At the command line, enter the following command:
uptime
This command displays:
• The length of time the system has been in operation.
• The total cumulative amount of up time since the system was
first powered on.
• The date and time of the last reboot.
• The reason for the last reboot.
• The reason for the last switch reboot is also recorded in the
error log.
Displaying the Fan Status
To display the fan status of a switch:
1. Log in to the switch as the admin user.
2. At the command line, enter the following command:
fanShow
The possible values for fan status are:
• OK — Fan is functioning correctly.
• absent — Fan is not present.
• below minimum — Fan is present but rotating too slowly or
stopped.