Filter
Top Products
2
2-10
Departmental Switch DS-16B2 Fabric OS Procedures Manual
Basic Switch Configuration Procedures
Enabling the Track Changes Feature
To enable the track changes feature:
1. Log in to the switch as the admin user.
2. At the command line, enter the following command:
trackChangesSet 1
A prompt is displayed verifying that the track changes feature is
on. The output from the track changes feature is dumped to the
error log for the switch. Use the
errdump command or errshow
command to view the error log.
Trackable changes are:
• Successful login
• Unsuccessful login
• Logout
• Config file change from task
• Track changes on
• Track changes off
Items in the error log created from the Track changes feature are
labeled
Error TRACK. For example:
Error 08
--------
0x102cf710 (tShell): May 2 16:12:10
Error TRACK-LOGIN, 4, Successful login
Displaying Whether
Track Changes is
Enabled
To display the status of the track changes feature:
1. Log in to the switch as the admin user.
2. At the command line, enter the following command:
trackChangesShow
The status of the track changes feature is displayed as either on or
off. This also displays whether the track changes feature is
configured to send SNMP traps. For example:
switch:admin> trackchangesshow
Track changes status: ON
Track changes generate SNMP-TRAP: NO