Filter
Top Products
45
Options and Accessories
STI-EIO Interface
The STI-EIO interface allows access to all digital input and output signals. The STI-EIO
mounts directly to the J3 connector on the drive. See Figure 40 on 45.
Note
Shield connection points are connected to the shell of the 44-pin “D” connector on the
STI EIO.
The STI-EIO wire range is #18 to 24 AWG stranded insulated wire.
Note
Wiring should be done with consideration for future troubleshooting and repair. All
wiring should be either color coded and/or tagged with industrial wire tabs. Low voltage
wiring should be routed away from high voltage wiring.
Figure 40: Dimensions of STI-EIO