Filter
Top Products
SAG582135000 System Application Guide
Issue AE, January 31, 2007 Spec. No. 582135000 (Model LXP48F1)
Page 18 of 43
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
ACCESSORY INFORMATION
Distribution Devices
Bullet Nose Type Circuit Breakers
Each circuit breaker plugs into a single mounting position.
Ordering Notes
1) Order circuit breakers per Table 1
.
Note: Load should not exceed 80% of device rating.
Caution:
A circuit breaker with a rating greater than 75 amperes SHALL HAVE an empty mounting
position between it and any other overcurrent protective device.
Caution:
The maximum size circuit breaker used in ambient temperatures above +50°C ambient
shall be 40 amperes.
2) Order one (1) Part No. 524690 mounting kit for each circuit breaker ordered.
3) For lug and wire size selection, refer to Table 4
.
BULLET NOSE TYPE CIRCUIT BREAKERS
AMPERE
RATING
PART NUMBER
Electrical/
Mechanical Trip
1
(Black Handle)
PART NUMBER
Electrical Trip
2
(White Handle)
1 101596 102272
3 101597 102273
5 101598 102274
10 101599 102275
15 101600 102276
20 101601 102277
25 101602 102278
30 101603 102279
35 101604 102280
40 101605 102281
45 121997 121998
50 101606 102282
60 101607 102283
70 101608 102284
75 101609 102285
80 121995 121996
100 101610 102286
Circuit Breaker Alarm Operation:
1
Provides an alarm during an electrical or manual trip condition.
2
Provides an alarm during an electrical trip condition only.
Unless otherwise specified, breakers are to be mounted from right to left
starting with the highest capacity and working to the lowest capacity.
Table 1
HomeHome