Filter
Top Products
Write Filemarks Packet
7-49
7
Write Filemarks Packet
The write filemarks command ($10) writes the specified number of filemarks
to the tape.
Note
The controller must be in general mode or write mode.
Refer to tape read/write packet for more information.
The table below shows the write filemarks packet.
Even Byte \
Odd Byte \
$19 xxxxxxxx Status from SCSI
firmware (byte 3)
(Note 1)
NOTE:
1. Refer to Chapter 3.
FC B8 74 30
+$00 Controller LUN Device LUN
+$02 Status Byte 0 Status Byte 1 (Note 1)
+$04 Number of Filemarks
+$06 0000
+$08 0000
+$0A 0000
+$0C 0000
+$0E 0000
+$10 0000
+$12 0000
+$14 0 0 Function Code (3C)
+$16 Interrupt Level Vector Number
+$18 Status Byte 2 Status Byte 3 (Note 1)