Enfora Enabler II-G Assisted GPS
Modem Integration Guide
3. Manual Overview
This document describes the hardware interface of the Enabler II-G Assisted GPS (A-GPS)
modem. The purpose of this document is to define the electrical, mechanical and software
interfaces while providing detailed technical information in order to streamline the process of
hardware and system integration.
3.1. Revision History
Date Rev Author Description
9/18/2006 1.00 Tom Cone Initial Release
10/3/2006 1.01 Edited GPS Receiver Sensitivity values; Edited Figure 13 to
reflect “GPS NMEA OUTPUT DATA;” Section 12.1, edited
GPS sensitivity; Added Sunridge connector information to
sections 6.5.2 and 6.5.3; Edited section 5.3.6.; Edited Figure
4, Host Board Layout
MLG0208PB001 4 Version1.01 – 10/3/2006