Enfora MLG0208PB001 Modem User Manual


 
Enfora Enabler II-G Assisted GPS
Modem Integration Guide
2. Configure the COM port as displayed below.
Figure 23 COM Port Settings
11.1.2. Initialization (AT Command Interface)
In the GSM vocabulary, a call from GSM mobile to the PSTN is called a "mobile-originated call" or
"outgoing call". A call from the fixed network to a GSM mobile is called a "mobile-terminated call"
or "incoming call."
In the following examples, “Entry” refers to the application. The following convention describes
the direction of the data exchange:
The data exchange from the customer application to the Enfora Enabler II-G A-GPS module
is designated as:
Entry
The data exchange from the Enfora Enabler II-G A-GPS module to the customer
application is designated as:
Response
Note: With the exception of the +++ command (Online Escape Sequence), all commands
must be preceded by the AT attention code (or command prefix) and terminated by
pressing the <CR> character.
MLG0208PB001 55 Version1.01 – 10/3/2006