Filter
Top Products
Enfora Enabler II-G Assisted GPS
Modem Integration Guide
Figure shows a typical connection from an external processor to the Enfora Enabler II-G A-GPS module, using the
external PWR_CTL_SIGNAL solution. The Enfora Enabler II-G A-GPS can be powered on by using the
PWR_CTL_SIGNAL signal. When using PWR_CTL_SIGNAL, the I/O or serial lines can be at any voltage state
desired. It is suggested that the I/O and serial lines be tri-stated or set low when the MLG208 is shutdown for an
extended period of time to conserve power.
Figure 11 Power Control Signal (using external processor)
MLG0208PB001 30 Version1.01 – 10/3/2006