Filter
Top Products
Enfora Enabler II-G Assisted GPS
Modem Integration Guide
module meets the maximum
permissible exposure (MPE)
limits for general population /
uncontrolled exposure at defined
in Section 1.1310 of the FCC
Rules and Regulations.
14.8.2. Specific OEM Responsibilities for Portable Products and Applications
Each device or product, into which the Enfora Enabler II-G A-GPS PCS-1900 GSM transceiver
has been incorporated, and which is intended to be used in an application that meets the
definition of "portable" MUST be separately authorized by the FCC for the purposes of
determining compliance with current FCC guidelines limiting human exposure to radio frequency
radiation.
Portable devices must be evaluated for RF exposure based on Specific Absorption Rate (SAR)
limits; further information on such evaluations are available from the FCC via the Internet.
14.8.3. Specific OEM Responsibilities for Mobile Products and Applications
Separate or additional FCC approvals are NOT required for devices or products, into which the
Enfora Enabler II-G A-GPS PCS-1900 GSM transceiver has been incorporated, that are used in
applications that meet the definition of "mobile."
For all end products, the OEM or integrator must provide instructions, warnings and labels to
ensure that the product complies with current FCC guidelines limiting human exposure to radio
frequency radiation.
Current FCC regulations limit the EIRP of mobile devices to 2 W. Because the nominal RF output
power of the Enfora Enabler II-G A-GPS GSM1900 GSM transceiver is 1.0 W (30 dBm), antenna
gain for mobile products and applications cannot exceed 3 dBi.
14.8.4. Specific OEM Responsibilities for Fixed Products and Applications
Separate or additional FCC approvals are not required for devices or products, into which the
Enfora Enabler II-G A-GPS GSM transceiver has been incorporated, that are used in applications
that meet the definition of "fixed.”
For all end products, the OEM or integrator must provide the instructions, warnings and labels to
ensure that the product complies with current FCC guidelines limiting human exposure to radio
frequency radiation.
Separate or additional FCC approvals are required for devices or end products used in fixed
applications where antenna gain in excess of 7dBi is desired.
MLG0208PB001 71 Version1.01 – 10/3/2006