EPoX Computer EP-6VBA Personal Computer User Manual


 
BIOS
EP-6VBA
Page 4-11
OnChip USB:
Select Enabled if your system contains a Universal Serial Bus(USB) controller
and you have a USB peripheral.
USB Keyboard Support:
This controls the activation status of an optional USB keyboard that may be
attached.
The default is disabled.
Enabled: Enable USB keyboard support.
Disabled: Disable USB keyboard support.
OnChip Sound:
Turn on/off onchip sound device.
OnChip Modem:
Turn on/off onchip software modem device.
4-4 Power Management Setup
Choose the “POWER MANAGEMENT SETUP” in the CMOS SETUP UTIL-
ITY to display the following screen. This menu allows the user to modify the
power management parameters and IRQ signals. In general, these parameters
should not be changed unless it’s absolutely necessary.
Figure 5: Power Management Setup
ROM PCI/ISA BIOS (2A6LGPAA)
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
ACPI function : Enabled
Power Management : User Define
PM Control by APM : Yes
Video off After : Suspend
Video off Method : V/H SYNC+Blank
MODEM Use IRQ : 3
Soft-off by PWRBTN : Delay 4 Sec
PWRON After PW-Fail : Former-Status
HDD Power Down : Disable
Doze Mode : Disable
Suspend Mode : Disable
** PM Events **
VGA : OFF
LPT & COM : LPT/COM
HDD & FDD : NO
DMA/master : OFF
Modem Ring Resume : Disabled
RTC Alarm Resume : Disabled
Esc : Quit : Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift) F2 : Color
F7 : Load Setup Defaults
éé
éé
é
êê
êê
ê
èè
èè
è
çç
çç
ç
Primary INTR : ON
IRQ3 (COM 2) : Primary
IRQ4 (COM 1) : Primary
IRQ5 (LPT 2) : Primary
IRQ6 (Floppy Disk) : Primary
IRQ7 (LPT 1) : Primary
IRQ8 (RTC Alarm) : Disabled
IRQ9 (IRQ2 Redir) : Secondary
IRQ10 (Reserved) : Secondary
IRQ11 (Reserved) : Secondary
IRQ12 (PS/2 Mouse) : Primary
IRQ13 (Coprocessor) : Primary
IRQ14 (Hard Disk) : Primary
IRQ15 (Reserved) : Disabled