Filter
Top Products
BIOS
EP-6VBA
Page 4-16
Reset Configuration Data:
This setting allows you to clear ESCD data..
The default is Disabled.
Disabled: Normal Setting.
Enabled: If you have plugged in some Legacy cards to the system and they
were recorded into ESCD (Extended System Configuration Data),
you can set this field to Enabled in order to clear ESCD.
CPU to PCI Write Buffer:
When enabled, up to four D words of data can be written to the PCI bus
without interruting the CPU. When disabled, a write buffer is not used and the
CPU read cycle will not be completed until the PCI bus signals that it is ready
to receive the data.
The Choice: Enabled, Disabled.
PCI Dynamic Bursting:
When Enabled, data transfers on the PCI bus, where possible, make use of the
high-performance PCI bust protocol, in which graeater amounts of data are
transferred at a single command.
The Choice: Enabled, Disabled.
PCI Master 0 WS Write:
When Enabled, writes to the PCI bus are command with zero wait states.
The Choice: Enabled, Disabled.
PCI Delay Transaction:
The chipset has an embedded 32-bit posted write buffer to support delay
transactions cycles. Select Enabled to support compliance with PCI specifica-
tion version 2.1.
The Choice: Enabled, Disabled.
PCI #2 Access #1 Retry:
This item allows you enabled/disable the PCI #2 Access #1 Retry.
The Choice: Enabled, Disabled.