Filter
Top Products
BIOS
EP-6VBA
Page 4-12
You can only change the content of Doze Mode, Standby Mode, and Suspend
Mode when the Power Management is set to ‘User Define’.
Power Management:
Use this to select your Power Management selection.
The default is User define.
Disabled: The system operates in NORMAL conditions (Non-GREEN),
and the Power Management function is disabled.
Max. saving: Maximum power savings. Inactivity period is 1 minute in
each mode.
Min. saving: Minimum power savings. Inactivity period is 1 hour in
each mode.
User define: Allows user to define PM Timers parameters to control
power saving mode.
PM controlled APM:
This option shows weather or not you want the Power Management to be
controlled the Advanced Power Management (APM).
The default is Yes.
Yes: APM controls your PM
No: APM does not control your PM
Video Off Method:
This option allows you to select how the video will be disabled by the power
management.
The default is V/H Sync + Blank
V/H Sync + Blank: System turns off vertical and horizontal synchronization
ports and writes blanks to the video buffer.
DPMS: Select this option if your monitor supports the Display
Power Management Signaling (DPMS) standard of the
Video Electronics Standards Association (VESA). Use
the software supplied for your video subsystem to select
video power management values.
Blank Screen: System only writes blanks to the video buffer.