Filter
Top Products
94 Using the Projector on a Network
Configuring the Projector
1. Press the Menu button, then choose Network and press Enter.
2. Choose
Network Configuration and press Enter.
3. Choose
Wireless LAN and press Enter. You see this screen:
4. Make sure Wireless LAN Power is set to
On. You can turn it off
to prevent unauthorized access.
5. Select one of the following connection modes:
■ Quick mode lets you easily connect one computer to the
projector at a time. You can also select this setting when
you’re using the optional Epson Quick Wireless Connection
USB key.
■ Advanced mode lets multiple computers access the projector
at the same time and easily trade off control of the projector.
This method requires a wireless network access point or an
AirPort Extreme (or AirPort) base station.
6. If your network is using 802.11a, use the arrow buttons on the
remote control to highlight
802.11a, then press Enter to select it.
Press
Esc to return to the previous menu.