Filter
Top Products
Fine-tuning the Projector 67
3. Use the pointer button (or the down arrow button) and press
Enter to select User’s Logo.
4. When you see a message asking if you want to use the present
image as a user’s logo, select
Yes and press Enter. A selection box
displays over the image.
5. Use the pointer button on the remote control or the arrow
buttons on the projector to select the area of the image you want
to use. Once you have selected the area, press
Enter.
6. When you see the message
Select this image?, choose Yes and
press
Enter. If you want to change the area selected, select No,
press
Enter and repeat steps 5 and 6.
7. When you see this screen, select a zoom rate (display size), and
then press
Enter.
8. When you see the message
Save image as user’s logo?, select
Yes and press Enter. Saving the logo takes a few moments. Do
not use the projector or other sources (computer, video, etc.)
while the logo is being saved.
9. When you see the message
Completed, press Esc.
10. To display the logo as the background screen when the A/V Mute
button is press, select the
Display menu and press Enter.
11. Select
Background Color and press Enter. Then select Logo and
press
Enter.
12. When you’re finished, press
Menu to exit the menus.
note
The default setting for the
Startup Screen option in
the
Display menu is ON. If
the
Startup Screen is set to
OFF, the logo will not
display at startup.
If the User’s Logo Protect
function has been set to
ON,
the
Background Color
setting cannot be changed.
You need to turn the protect
function off first. See page 68
for details.
Once you’ve saved a user’s
logo, you cannot reset the logo
setting to its factory default
(no logo).