Filter
Top Products
Solving Problems 85
Solving Problems with the Image or
Sound
No image appears on the screen.
■ Check that the power light is green, not flashing, and the lens cap
is off.
■ The projector may be in standby or sleep mode. If the projector
has not received any input signal for 30 minutes, it turns off the
lamp to conserve the lamp life and save energy. If the power light
is orange, press the P
Power button to turn the projector on.
■ Press the A/V Mute button to make sure the picture has not been
turned off temporarily.
■ If the power was switched off and then on again, wait until the
power light stops flashing and remains orange; then press the P
Power button again.
■ Check the Video Signal or Computer1 Input or Computer2
Input
setting in the Signal menu to make sure it is correct for the
selected source. See page 58 for more information.
■ Have messages been turned off in the Display setting of the
Extended menu? See page 62 for details.
■ Adjust the Brightness setting on the Image menu or select High
for the
Brightness Control setting in the Extended menu. See
page 56 or page 61.
■ The attached computer may be in sleep mode or displaying a
black screen saver. Try pressing a key on the computer.