Filter
Top Products
Dial Modifiers
Modifier
Description
I
Hookflash (0.5 seconds)
Pause (2 seconds)
,
;
Return to command state after dialing
@
Wait for 5 seconds if silent answer
P
Pulse dialing
R
Reverse to answer mode
S
Dial stored number
T
Touchtone dialing
W
Wait 30 seconds for second dialtone
MNP
Command Summary
Command
Description
\A0
Sets the MNP block size to 64 characters
\A1
Sets the MNP block size to 128 characters
\A2
Sets the MNP size to 192 characters
\A3
Sets the MNP size to 256 characters
\B3
Sets transmit break to 300ms
%C0
Disable data compression during MNP level 5 reliable link
connection
%C1
Enable data compression during MNP level 5 reliable link
connection
\G0
Disable modem port flow control
\G1
Enable modem port flow control
\J0
Disable speed adjust at serial port
\J1
Enable speed adjust to match serial port
\K1
Empty data buffers and immediately send a break to the
remote system
\K3
Send a break to the remote modem in sequence with data
\K5
Send a break to the remote terminal or computer in sequence
with any data received from the serial port
\N0
Set normal mode
\N1 Set direct mode
B-6
Fax/Modem