Filter
Top Products
Selecting PostScript
For EPL-7000/7100 users
1.
2.
Hold down the SelecType button for several seconds until you
enter SelecType Level 2. A SelecType Level 1 option is displayed
briefly before the printer enters the Level 2 main menu.
Press the
Aor
vbutton
until the “CH CONFIG P,S” menu
appears.
3.
4.
5.
Press the
bbutton
to enter the option; one of the submenus
(MODE, I/F, or RX-/BUFFER) appears.
Press
theA
or
vbutton
until the MODE submenu appears. If
this menu is displayed in step 3, ignore this step.
Press the
bbutton
to enter the option; one of the options and
the
El
icon appear.
6.
Press the
Aor
vbutton
until the
“#
PS” option appears.
7.
Press the
bbutton
to set the PS option.
8.
Press the SelecType button once to exit SelecType.
The PS mode remains in effect until you change the setting or turn
off the printer. If you want to make this setting permanent, use the
“P-CONFIG. SAVE” menu in SelecType Level 2. See your printer
manual.
Handing the PostScript CARD
1-5