Filter
Top Products
SelecType
L-OFFSET
from -64 to -1
from 1 to 63
T-OFFSET
from -64 to -1
-0
from 1 to 63
PAGETYPE
+
FULL
NOTE
Makes fine adjustments in the horizontal
printing position (left offset) on the page. The
setting is in dots; the size of each dot varies
depending on the printer. For example,
EPL-4100 is a 300-dpi printer, so the dot size is
1/300 inch (0.0846 mm). In this case, you can
use this submenu to move the printing on the
page approximately 1/5 inch to the left
(settings from -64 to -1) or to the right (settings
from 1 to 63). The factory setting is 0.
Makes
fine adjustments in the vertical printing
position (top offset) on the page. The setting is
in dots; the size of each dot varies depending
on the printer. For example, the EPL-4100 is a
300 dpi printer, so the dot size is 1/300 inch
(0.0846 mm). In this case, you can use this
submenu to raise or lower the printing on the
page approximately 1/5 inch. The factory
setting is 0.
Sets the memory area. Your printer maintains a
memory area for processing printing data.
There are two sizes of memory area. If the
FULL option is selected, your printer maintains
a large memory area. If the NOTE option is
selected, it maintains a small memory area. If
you print on LG (legal), GLG (government
legal), or F4 size paper, you should expand
your printer’s memory or the image of your
output might be clipped.
2-6
Using the PostScript CARD