Filter
Top Products
Running Tests
Follow these steps to run a test from the Execute menu:
1. Press
[t3
or (T] to select Execute. You see the Execute
menu, such as the following:
System Board
Numeric Coprocessor
System Memory
Diskette Drive A
Hard Disk Drive #1
Serial Port COMl
Printer Port LPTl
Video Adapter Test
Keyboard Test
2.
Press
(t)
or
17)
to highlight the device you want to test
and
press
[Enter).
You see the Repeat prompt:
How often to repeat test? 1
3.
If you want to run the test once, press
[E).
To
run the test
more
than once, type the number of times and press
[cl.
4.
If there is only one test for a device, the program begins
testing immediately. If there is more than one test for the
device, you see a submenu, such as the following:
HARD DISK DRIVE(S) AND CONTROLLER CHECK MENU
1
- Seek check
2
- Write,
read check
3
- Read, verify check
4
- Run all above checks
0
- Exit
Running System Diagnostics
4-5