Filter
Top Products
Running Tests
Follow these steps to run a test from the Execute menu:
1.
Press
m
or
a
to select Execute. You see the Execute
menu, such as the following:
System Board
Numeric Coprocessor
System Memory
Diskette Drive A
Hard Disk Drive
#l
Serial Port
COMl
Printer Port
LPTl
Video Adapter Test
Keyboard Test
2.
Press
(Tl
or
m
to highlight the device you want to test
and press IEnter You see the Repeat prompt:
How often to repeat test? 1
3.
If you want to run the test once, press (Enter. To run the test
more than once, type the number of times and press IEnter
4.
If there is only one test for a device, the program begins
testing immediately. If there is more than one test for the
device, you see a submenu, such as the following:
HARD DISK DRIVE(S) AND CONTROLLER CHECK MENU
1 - Seek check
2 - Write,
read check
3 - Read, verify check
4 - Run all above checks
0 - Exit
Running System Diagnostics
4-5