Filter
Top Products
If the error is serious, the computer cancels further checking
and halts system initialization. The error message remains on
the screen and the computer locks up. If this happens, contact
your Authorized Epson Servicer as soon as possible. Report
any error messages when you request technical assistance.
The following table lists all the error messages that may appear
during power-on diagnostics. If you receive an error message,
look it up in the table below; it directs you to the proper
troubleshooting section in this chapter or offers a solution. If
you do not see an error message, read the section that covers
your problem.
Power-on diagnostics error messages
t
Error code Message
System board
101
Primary/secondary interrupt
controller failure
102
Timer 0 failure
103
Timer 0 interrupt failure
105
Keyboard input buffer full
106
I/O
port word access error
107
NMI failure
108
Timer 2 failure
I
Real-time clock
161
System options not set
162
System options not set
163
Time and date not set
164
Memory size error
Action
Contact
Authorized Epson
Servicer
Run SETUP; see
Chapter 2 of the
Setup Guide
1
Troubleshooting 6-3