Filter
Top Products
13
Basic Operations
Adjusting the Image Quality
The quality of the screen images can be adjusted as follows.
Procedure
Turn the focus ring to adjust the image
focus.
The following five color modes have been preset for use with images with varying characteristics. You can
use these color modes to obtain the optimum image quality easily, just by selecting whichever color mode
best suits the images. The brightness of the projected images will vary depending on the mode.
Procedure
The color mode changes as shown
below each time the [Colortune] button
on either the remote control or the
projector's control panel is pressed.
Dynamic → Theatre → Natural → PC → sRGB
The current setting appears on the screen each
time the color mode changes.
Focusing the Screen Image
•
••
•
If the surface of the lens is dirty or misted
over as a result of condensation, it may
not be possible to adjust the focus
correctly. If this happens, clean or de-mist
the lens. (p.44)
•
••
•
If the projector is positioned outside the
normal projecting range of 0.9 - 13 m (2.9
- 42.6 ft.), it may not be possible to obtain
the correct focus. If you have trouble
obtaining the correct focus, check the
projection distance.
Selecting the Color Mode
Mode name Gamma Color Temp
Priority
element
Use
Dynamic Original 1 6700 K
(adjustable)
Color Ideal for projecting images with greater modulation and
intensity.
Theatre Original 2 6700 K
(adjustable)
Color Ideal for enjoying presentations such as movies which have
large numbers of dark scenes.
Natural 2.2
(Basic)
6700 K
(adjustable)
Color Ideal for enjoying presentations in a natural atmosphere.
PC 2.2
(Basic)
7500 K
(adjustable)
Brightness Ideal for use in making images as bright as possible when
projecting computer images.
sRGB
2.2
(Basic)
6500 K (fixed) Color Images conform to the sRGB standard. If the connected video
source has an sRGB mode, set both the projector and the video
source to sRGB.
The color mode setting can also be
changed using the "Color Mode" item of the
projector's "Video" menu. (p.25, 27)
Focus ring
Projector Remote control
Theatre
Focusing the
Screen Image
Selecting the Image
Aspect Ratio
Selecting the
Color Mode
Automatic Adjustment
of Computer Images