Filter
Top Products
Advanced Operations
31
•
••
•
The “About” menu displays the settings for the input source for the images being projected, and also shows
the lamp status.
•
••
•
The "Lamp" shows times between 0 and 10 hours as 0H. Times greater than 10 hours appear in units of one
hour.
Setting Projection Selects the projection method in accordance with the projector and screen
setting-up method.
•
••
•
Front :Projection from the front of the screen
•
••
•
Front/Ceiling :Projection from the front of the screen with the
projector installed to the ceiling (upside down)
•
••
•
Rear :Projection from the rear of the screen
•
••
•
Rear/Ceiling :Projection from the rear of the screen with the projector
installed to the ceiling (upside down)
Front
Language Sets the language for message, menu and help displays.
•
••
•
Press the [Select] on either the projector's control panel or the remote
control, and select the language from the selection menu that appears.
English
Reset Returns the adjustment values in the “Setting” menu to the default values.
•
••
•
Press the [Select] on either the projector's control panel or the remote
control to display the confirmation screen, and select “Ye s”.
•
••
•
Select “Reset All” to return all menu settings to their default settings.
(p.32)
-
About Menu
Video (InputA (YCbCr , YPbPr ), InputB (YCbCr, YPbPr), S-Video, Video)
Main menu Sub-menu Function
Default
setting
About Lamp
Displays the cumulative lamp operating time.
When the lamp warning period is reached, the display characters appear in red.
0H
Reset Lamp
Timer
Initializes the lamp operating time when the lamp is replaced. When this
command is selected, the cumulative lamp operating time is reset to the
initial default value.
-
Video Source Displays the image source which is currently being projected. Depends on
connection
Video Signal Displays the video signal format. Auto
Main menu Sub-menu Function
Default
setting
Lamp
Reset Lamp Timer
Video Source
Video Signal
Execute
0H
Video
Setting
Advanced
About
Reset All
Select Enter
Video (InputA (YCbCr, YPbPr), InputB (YCbCr, YPbPr), S-Video, Video)
Video menu Setting menu Reset All menu
Advanced menu About menu