Filter
Top Products
Maintenance
48
Procedure
1
Turn off the power switch at the rear of
the projector, and then disconnect the
power cord. (p.8)
2
Put your finger into the recess in the air
filter hook, and lift up the air filter to
remove it.
In order to prevent any dust on the air filter from
getting into the projector, be sure to stand up the
projector so that the handle is at the top.
3
Install the new air filter.
First insert the tabs, and then press down on the
opposite side until it clicks into place.
Replacing the Air Filter
Dispose of used air filters properly in accordance with your local regulations.