Filter
Top Products
34
Using the Help
If a problem occurs with the projector, the Help function uses on-screen displays to assist you in solving the problem. It
uses a series of menus in a question and answer format. The questions vary depending on the type of video source.
Procedure
1
Press the [Help] button on either the
remote control or the projector's
control panel.
The Help menu will be displayed.
2
Select a menu item.
If using the projector's control panel, press the
and buttons.
If using the remote control, tilt the [Select] button
up and down.
3
Confirm the selection.
Press the [Select] on either the projector's control
panel or the remote control to confirm the
selection.
The sub-menu appears.
4
Repeat the operations in steps 2 and 3
to proceed through the menu to more
detailed items.
To return to the previous menu, press the [Esc]
button on either the remote control or the
projector's control panel.
You can exit the Help menu at any time by
pressing the [Help] button on either the
projector's control panel or the remote control.
If the Help function does not provide a
solution to the problem, refer to "When
Having Some Trouble" (p.35) or "When the
Indicators Provide No Help" (p.37).
Remote controlProjector
Select Enter
Exit
Help Menu
Help for the image
If the suggested solution in Help doesn't solve the problem unplug
the power from the wall outlet and contact your local dealer.
Language selection (Language)
Remote controlProjector
Remote controlProjector
No image appears on the screen.
The image is not in focus.
The image is distorted.
The image is not displayed fully on the screen.
(cut off/ too big/ too small/ partial)
The color of the image is abnormal.
The image is too dark.
The image is trapezoi dal.
Help Menu
Select
Enter
Exit
Return