Filter
Top Products
Paper Handling 17
R
Chapter 2
Paper Handling
This chapter covers some important instructions you need to load and
use paper in your printer. For complete paper handling information, see
the Reference Guide.
Setting the Paper Release Lever
Before you start printing,
be sure to set the paper
release lever to indicate
the paper source you
want to use, as described
in the table below.
Lever position Description
Single-sheet position
For loading single-sheet paper from the top or front slot.
Rear push tractor position
For loading continuous paper with the tractor installed in the
rear push position or when using the rear push and pull tractors
in combination.
Front push tractor position
For loading continuous paper with the tractor installed in the
front push position or when using the front push and pull tractors
in combination.
Pull tractor position
For loading continuous paper from the tractor installed on top
of the printer in the pull position. You can load paper in the
front, rear, or bottom slot.