Filter
Top Products
5 • Maintenance
■ ■ ■ ■ ■ ■
86
5. Lift up the handle and pull out the lamp.
6. Gently insert the new lamp by lowering it into position. Make sure
it is inserted securely.
7. Tighten the screws you loosened in step 4.
8. Replace the lamp cover and tighten the cover screws. (Make sure
the lamp cover is securely fastened. The projector turns itself off if
the lamp cover is open.)
pro-ch5.fm Page 86 Tuesday, May 13, 1997 2:23 PM