Filter
Top Products
Installing the Software
■ ■ ■ ■ ■ ■ ■ ■
61
2. In the Windows Program Manager, click on the File menu, then
on Run. The Run dialog box appears:
3. Type
A:\SETUP
(or
B:\SETUP
as appropriate), then press Enter
or click OK. The ELP Link II introduction appears.
4. Press
C
to continue.
5. To accept the default location for where the software should be
installed, press
C
to continue. Otherwise, enter a new directory
name and then press
C
.
6. The Link II software communicates with the projector using the
computer’s serial communication (COM) port. Specify which
COM port to use, then press
C
to continue. (Most likely, your
computer is using COM 1.)
7. A summary screen appears stating how much free hard disk space
is required to run the software and how much is available. If
sufficient disk space is available, press
C
. Otherwise, press
X
(exit)
to free up some disk space; then restart the installation program
from step 1.
pro-ch4.fm Page 61 Tuesday, May 13, 1997 2:22 PM