Filter
Top Products
Setting Up the Projector
■ ■ ■ ■ ■ ■ ■ ■
5
3. Make sure the projector is at a right angle to the screen.
Otherwise, the screen image will be distorted.
4. Connect one end of the power cord to the projector’s power
connector. Connect the other end to a grounded electrical outlet.
The projector goes into sleep mode, indicated by the orange power
status light.
✦
Warning:
Never look into the lens when the lamp is on. The projector
might come on suddenly, even when it is not operating. This can
damage your eyes. It is especially important that children not look into
the lens.
Image size (diagonal)
Horizontal distance from projector to screen
Minimum Maximum
300 inches 393.7 inches (10 m)
200 inches 263.8 inches (6.7 m) 342.5 inches (8.7 m)
100 inches 129.9 inches (3.3 m) 169.3 inches (4.3 m)
80 inches 106.3 inches (2.7 m) 137.8 inches (3.5 m)
60 inches 78.7 inches (2 m) 102.4 inches (2.6 m)
40 inches 51.2 inches (1.3 m) 66.9 inches (1.7 m)
30 inches 39.4 inches (1 m) 51.2 inches (1.3 m)
23 inches 39.4 inches (1 m)
pro-ch1.fm Page 5 Tuesday, May 13, 1997 2:19 PM