Filter
Top Products
Unpacking the Projector
■ ■ ■ ■ ■ ■ ■ ■
3
Additional Components
Depending on how you plan to use the projector, you may need
additional components:
●
To receive an S-Video signal, you need an S-Video cable. (One is
usually provided with your video device.) A separate cable is
required for each video source.
●
Video and audio cable to connect a second computer
●
To connect the projector to a Macintosh PowerBook, you need a
video-out cable. (One is provided for all new PowerBooks that
have video-out capability.) If your PowerBook does not include
one, see your Macintosh dealer.
●
To connect the projector to an external sound system, you need an
RCA-to-3.5 mm stereo audio cable. You can obtain one from your
computer dealer.
●
To connect the mouse cable to your computer, you may require a
special connector, cable, or other components. You can obtain
these items from your computer dealer.
Note:
You can connect a Kensington MicroSaver anti-theft device in
the hole on the right side of the projector. Contact your local computer
dealer.
pro-ch1.fm Page 3 Tuesday, May 13, 1997 2:19 PM