Filter
Top Products
29
Saving a User's Logo
3 When "Choose this image as the User's Logo?" appears, select
"Yes".
4 The image to be recorded and a selection marquee box will be
displayed. Move the marquee box to select the part of the image
to use.
5 When "Select this image?" appears, select "Yes".
6 Select the zoom rate from the Zoom rate setting screen.
7 When "Save this image?" is displayed, select "Yes".
The image will then be saved. Once the image has been saved, the
message "Completed." will be displayed.
p
When you press the [Enter] button, the image will be displayed at its
original resolution. For example, if a video image or an image with a
resolution that is different from the projector’s native resolution is being
displayed, the image size will change.
Using the remote control
Using the control panel
p
User's logos can be saved at up to 400 × 300 dots in size.
p
• Saving the user's logo may take a few moments (about 15 seconds). Do
not use the projector or any other sources which are connected to the
projector while the user's logo is being saved, otherwise it may result in
errors in projector operation.
• Once a user's logo has been saved, the logo setting cannot be returned to
the factory default.