Filter
Top Products
1-2
Setting up the Printer with Your PC
R4C5980
Rev. C
A5 size Setup.fm
7/12/01 Pass 3
L
Proof Sign-off:
DAI A. Kobayashi T. Morita
K. Nishi
DAI K. Ramsey
Connecting the Printer to Your PC
The method you use to connect the printer to your PC depends
on whether you want to send print jobs directly to the printer
using the printer’s built-in parallel interface, or send print jobs to
the printer over a network using an optional interface card. For
information on using optional interface cards, see Chapter 5,
“Using an Optional Interface Card.”
To connect the printer to a Macintosh, see Chapter 2, “Setting up
the Printer with Your Macintosh.”
Using the built-in parallel interface
To use the printer’s built-in parallel interface, you will need a
shielded, twisted-pair cable. Then follow the steps below to
connect the printer to your computer.
Note:
To connect the printer parallel port and USB port of your computer
using the USB cable, you will need an additional conversion cable.
1. Make sure both the printer and computer are turned off.