Filter
Top Products
1
Setting up the Printer with Your PC
1-3
R4C5980
Rev. C
A5 size Setup.fm
7/12/01 Pass 3
R
Proof Sign-off:
DAI A. Kobayashi T. Morita
K. Nishi
DAI K. Ramsey
2. Plug the cable connector securely into the printer’s interface.
Then squeeze the wire clips together until they lock into place
on both sides. If your cable has a ground wire, connect it to
the ground connector below the interface connector.
3. Plug the other end of the cable into the computer’s USB port.
See the next section for instructions on installing the printer
software. You must install the printer software before using your
printer.
Installing the Printer Software on Your PC
After connecting the printer to your computer, you need to install
the software included on the “Printer Software for EPSON Stylus
PRO 9500” CD-ROM shipped with your printer.