Filter
Top Products
Explanation:
This command specifies the zoom values for the main scan (i1) and
the sub scan (i2) in the range of 50% to 200%. The zoom value
increment is 1% or 10%, depending on the scanner model. See
Appendix B for details.
When the zoom is set with the control panel, the zoom value of the
main scan and sub scan are equal. The setting made with this
command overrides the setting made from the control panel.
ESC H and other commands
When the scanner accepts this command, the scanning area is reset to
the maximum value allowed with the current resolution and zoom
settings. Always set the zoom before setting the scanning area.
See Chapter 2 for details on the software control procedures and on
the use of the ESC R, ESC H, and ESC A commands. Also see the
ESC A command.
3-28 Command Reference