Filter
Top Products
Software Defaults
With the DIP switches at the preset factory settings, the following
values are the default values on the GT-6000 when the power is
turned on.
Function Command Default value
Data format ESC D i=01
H
(1 bit/pixel/color)
Resolution ESC R n1=100, n2=100 (dpi)
Zoom ESC H i1=100, i2=100 (%)
Reading area ESC A n1=0, n2=0, n3=848, n4=1169 (dot)
Color mode ESC C i=00
H
(standard monochrome)
Brightness ESC L i=00
H
(center)
Gamma correction ESC Z i=01
H
(CRT Display A)
Halftoning mode ESC B i=00
H
(Halftoning Mode A)
Color correction ESC M i=80
H
(CRT Display)
Note:
The default values for the ESC B, ESC Z, and ESC M commands
are affected by DIP switch settings.
Scanner Model Technical Data B-21