Filter
Top Products
DIP Switch Setting
The GT-6000 has one bank of DIP switches on the control panel.
The tables below show the function of each switch and the preset
factory settings. The shaded boxes show the factory settings.
DIP switch 1 settings
Switch No. Function ON OFF
SW 1-1 Baud rate See table
SW 1-2
SW 1-3
SW 1-4 Stop bit 2 bits 1 bit
SW 1-5 Parity bit Even Odd
SW 1-6 Parity check Enabled Disabled
SW 1-7 Printer type for
direct printing
See table
SW 1-8
Baud rate settings
Setting SW 1-1 SW 1-2 SW 1-3
19200 bps OFF OFF OFF
9600 bps ON OFF OFF
4800 bps OFF ON OFF
2400 bps ON ON OFF
1200 bps OFF OFF ON
600 bps ON OFF ON
300 bps OFF ON ON
SCSI/Macintosh Plus ON ON ON
B-22 Scanner Model Technical Data