Filter
Top Products
Lights and Buttons
The scanner has three indicator lights and two buttons.
button
button
OPERATE
Comes on
light (green)
when the scanner is turned on.
READY
light (green)
Comes on when the scanner is ready to scan images. This light
flashes during scanning. When an error occurs, this light and
the
ERROR
light indicate the type of error. See the next page.
ERROR
light (red)
Comes on when an error occurs. Along with the
READY
light, it
indicates the type of error.
OPERATE
button
Turns the scanner on and off.
RESET
button
Resets the scanner after an error occurs. Pressing this button
during scanning stops the scanner and may cause an error in
the scanning software.
2-2
Scanner Basics