Filter
Top Products
Interface error
The interface setup is wrong, or the scanner is not properly
connected to the computer.
If this error occurs, check the interface connection. See
“Connecting the Scanner to Your Computer” in Chapter 1.
Then press the
RESET
button or turn the scanner off and back
on to reset it.
Fatal error
This indicates one of the following problems:
0
The transportation lock lever is set to the
LOCK
position.
0
The fluorescent lamp needs to be replaced.
0
The scanner is broken.
0
There is a problem, such as an open cover, with the
optional transparency unit or the optional automatic
document feeder.
Check that the transportation lock lever is set to the
UNLOCK
position and check any installed options; then press the
RESET
button. If the scanner still does not operate properly, try
turning the scanner off and then back on. If it still does not
operate properly, or if this error occurs repeatedly, consult
your dealer.
Option error
This indicates a problem such as a paper jam with an installed
option unit.
Check the option unit and correct the problem. See Chapter 3,
“Options.”
Troubleshooting 4-3