Filter
Top Products
R4C4590
Rev. C
A5 size COVER.FM
10/30/00 Pass 0
L
Proof Sign-off:
Takahashi, Kono _______
Takahashi _______
Hoadley _______
Control Panel Buttons and Lights
T
ear Off/Bin button (LQ-680)
●
Advances continuous paper to the tear-off position.
●
Feeds continuous paper backward from the tear-off
position to the top-of-form position.
●
Selects a cut-sheet feeder bin.
●
Turns on the card mode to print on postcards and envelopes.
T
ear Off/Bin lights (LQ-680)
●
f f
when continuous paper is in the tear-off position.
●
o n
when bin 1 of the optional cut-sheet feeder is selected.
●
n o
when bin 2 of the optional cut-sheet feeder is selected.
●
n n
when the printer is in the card mode.
Pause button
Stops printing temporarily, and
resumes printing when pressed
again. When pressed for three
seconds, turns on the *micro adjust
mode. To turn off, press again.
Pause light
●
On when the printer is paused.
●
Flashes when the printer is in the
*micro adjust mode.
●
Flashes when the print head has
overheated.
Font button
S
elects the font.
C
ondensed button
T
urns on and off the condensed mode.
Reset
W
hen you press both the Font and Condensed buttons
s
imultaneously, the printer clears its buffer and return to
its default settings.
Paper Out light
●
On when no paper is loaded
in the selected paper source
or paper is not loaded
correctly.
●
Flashes when paper has not
been fully ejected or a
paper jam has occurred.
Paper Source button & lights (LQ-680Pro)
S
elect a paper source. See Chapter 2.
T
ear Off/Special Paper button (LQ-680Pro)
●
Advances continuous paper to the
tear-off position.
●
Feeds continuous paper backward
from the tear-off position to the
top-of-form position.
●
Turns on the card mode or envelope
mode.
T
ear Off/Special Paper lights (LQ-680Pro)
●
f f
when continuous paper is in the
tear-off position.
●
o n
when the printer is in the card
mode.
●
n o
when the printer is in the envelope
mode.
*Micro Adjust mode
When you hold down the Pause button for three
seconds, the printer enters the micro adjust mode.
In this mode, you can press the LF/FF
D
and
Load/Eject
U
buttons to adjust the top-of-form or
tear-off position. See Chapter 2.
LF/FF button
●
Feeds paper line by line when pressing shortly.
●
Ejects a single sheet or advances continuous
paper to the next top-of-form position when held
down.
Load/Eject button
●
Loads a single sheet of paper.
●
Ejects a single sheet of paper if a sheet is loaded.
●
Loads continuous paper from the standby
position.
●
Feeds continuous paper backward to the
standby position.
LQ-680
LQ-680Pro
n
= On
f
= Flashing
o
= Off