Filter
Top Products
2
Paper Handling 2-29
R4C4590
Rev. C
A5 size HANDLE.FM
10/30/00 Pass 1
R
Proof Sign-off:
Takahashi, Kono _______
Takahashi _______
Hoadley _______
1. Make sure the printer is turned on. If necessary, lift up the
printer cover so you can see the paper position.
2. Load either continuous or single-sheet paper. (Press the
Load/Eject
button to load continuous paper from the tractor
or a single sheet from the optional cut-sheet feeder.)
3. Hold down the
Pause
button for about three seconds. The
Pause
light starts flashing and the printer enters the micro-
adjust mode.
4. Press the
LF/FF
[
D] button to move the paper toward the front
of the printer, or press the
Load/Eject
[
U] button to move the
paper toward the rear. The new loading position is set to the
position where you release the buttons.