Filter
Top Products
C
Specifications C-9
R4C4590
Rev. C
A5 size SPEC.FM
10/30/00 Pass 1
R
Proof Sign-off:
Takahashi, Kono _______
Takahashi _______
Hoadley _______
Continuous paper (standard and multipart): rear entry
Note:
❏
The ratio of the cut/uncut length at the perforation should be
between 3:1 and 5:1.
❏
The thickness of the perforation part when extended should be 2 mm
or less.
❏
The perforation between pages should not extend all the way to the
edges of the paper. Uncut length on the edges should be 1 mm or
more.
❏
When the horizontal and vertical perforation cuts crossing, do not
print in between 3 mm above and below the horizontal perforation
and in between 28 mm left and right the vertical perforation.
Width 101.6 to 304.8 mm (4 to 12 inches)
Length (one page) 101.6 to 558.8 mm (4 to 22 inches)
Copies 1 original + up to 5 copies
Thickness Printable area 0.065 to 0.46 mm
(0.0025 to 0.018 inch)
Gathering area up to 0.9 mm
(0.035 inch)
Weight
(not multipart)
52 to 128 g/m² (14 to 34 lb)
Weight
(one sheet of multipart)
40 to 58 g/m² (10 to 15 lb)
Binding Point glue or/and paper staples on
both sides