Filter
Top Products
45
Adjusting the Color
You can use the Color Adjustment settings to fine-tune the color of the image. If you select
RGB as the color mode, you can adjust the offset, gamma, and gain for each signal color (red,
green, and blue). Or select RGBCMY to adjust the hue and saturation for each of six colors.
1. Select
Picture Quality, then click Adjustment of image.
2. Select one of the following color modes, then click
Adjust.
■ RGB: Lets you adjust the offset, gamma, and gain for each signal color. Use Offset
to adjust darker shades,
Gamma for intermediate shades, and Gain for the lightest
shades.
■ RGBCMY: Lets you adjust the hue and saturation for each of six colors, as shown on
the color palette below. After moving a slider bar, click
Apply.
1. Select
Picture Quality
2. Click
Adjustment of image
3. Select the
color mode
4. Click Adjust
Adjust the hue
(red, green,
blue, cyan,
magenta,
yellow)
Adjust the
saturation