Filter
Top Products
2-2
Assembling the Printer
R4C4850
Setup Guide Rev.C
ASSEM.FM A5 size
8/17/00
L
Proof Sign-off:
DAI A. Kobayashi K. Araki
K. Nishi
DAI K. Ramsey
Choosing a Place for the Printer
Follow the guidelines listed below when placing your printer.
❏ Place the printer on a flat, stable surface that is larger than the
printer. The printer will not operate properly if it is tilted or
at an angle.
❏ Avoid placing the printer on soft surfaces, such as rubber
sheets or urethane rubber sheets. Doing so may affect the
quality of printed images.
❏ Place the printer close enough to the computer for the
interface cable to reach it easily.
❏ Leave adequate room for easy operation and maintenance.
❏ Leave enough room on the table at the front of the printer for
the paper tray.
❏ Avoid using or storing the printer in areas subject to rapid
changes in temperature and humidity. Also keep it away from
direct sunlight, strong light, or heat sources.
❏ Avoid areas subject to shocks and vibrations.
❏ Place the printer near a wall outlet where the plug can be
easily unplugged.
Note for French-speaking users:
Placez l'imprimante prés d'une prise de contacte où la fiche peut
étre débranchée facilement.