Filter
Top Products
Epson Stylus Photo RX600
12 - Epson Stylus Photo RX600 2/04
You see the File Save Settings window:
4. Type a name for your file in the
Prefix box.
5. Select a file format in the
Type box.
6. Click
OK. Epson Scan starts and scans your file to the
location you specified.
Note:
Never open the scanner lid while scanning, or your scans may
not look right.
Scanning From a Program
You can scan from any TWAIN-compliant program—such as
Adobe Photoshop or ArcSoft PhotoImpression—using Epson
Scan. Epson Scan provides three scanning modes for progressive
levels of control over your scanned image:
❏
Full Auto Mode makes scanning quick and easy, with
automatic image type and resolution settings.
❏
Home Mode provides a simple screen giving you automatic
image adjustments, previewing and cropping capability, and
preset configurations for various types of scans.
❏
Professional Mode lets you manually configure advanced
image settings.
See the User’s Guide for more information.
Scanning With the Scan Button
1. Place your document face-down on the glass as shown on
page 6, and make sure your computer and RX600 are on.
2. Close the scanner lid.
3. Press the
Scan button to set the RX600 to Scan mode.
4. Use the u and d buttons to choose
Scan to PC, then press
the
OK button.
Note:
You can also scan to a memory card or to an e-mail; see the
User’s Guide for instructions.
5. For Windows, if you see the screen below on your
computer, select
EPSON Scan and click the Always use
this program for this action
checkbox. Then click OK.
6. When you see the File Save Settings window, type a name
for your file in the
Prefix box, select a file format in the
Type box, and click OK.
7. Complete the scan using Epson Scan.
Placing Film or Slides on the Scanner
You can copy, scan, and print from 35 mm film strips and
slides. Follow the instructions below to:
❏ Remove the film holder and document mat
❏ Load 35 mm film strips in the film holder
❏ Place 35 mm slides on the film holder
Removing the Film Holder and Document
Mat
1. Open the scanner lid and slide out the document mat. Set
the mat aside so you can reinstall it for scanning reflective
documents later.
Note:
You can’t scan film or slides unless the white document mat is
removed from the scanner lid.
Type a name for
your file here
Select a file
format here
Then check this box
Select this option