Filter
Top Products
Basic Operations 113
Mistakes can be erased by pressing the l button to delete the previous character and
move the cursor back one spot.
3. After entering the name, press the Z button.
Auto Media Adjust
When this menu is executed, the printer automatically reads adjustment patterns using the
sensor while printing the patterns, and continuously performs Feed Adjustment and Head
Alignment.
Change the setting values of the following items before executing this menu:
❏ Platen Gap
❏ Advanced Settings
See “Customize Settings” on page 204.
Important:
❏ In the following cases, Auto Media Adjust may not be executed. Take the appropriate
action, and re-execute the job:
❏ The printer is exposed to direct sunlight or interference from other ambient light sources.
Shade the printer from sources of interference.
❏ Nozzles are clogged. Perform Head Cleaning to remove any clogs.
❏ In the following cases, Auto Media Adjust is not available. In Media Adjust, execute the
manual menu for each item.
❏ The media is transparent or colored.
❏ Platen Gap is set to 2.5.
❏ After Auto Media Adjust is performed, banding or graininess is found.
See “Media Adjust” on page 116.