Filter
Top Products
Basic Operations 70
11.Rotate the handle until part A in the illustration below is fully inserted.
12.Raise the media loading lever.
Important:
If the roll holder screw is loose, the roll holder may move during printing. This could cause
stripes and unevenness in the print results.
Important:
Once part A is hidden, do not turn the handle any further. Failure to observe this precaution
could damage the roll holder.
If part A is still visible even after the handle has been turned fully, rewind the handle.
Loosen the roll holder screw on the right side, and then restart from Step 8.