Filter
Top Products
Introduction 23
2 Heater temperature
From left to right, this display shows the temperature settings for the pre-heater, platen heater, and after heater. The
thermometer icons give a rough indication of the current temperatures of the heaters.
: The heater has reached the selected temperature.
: The heater has not reached the selected temperature.
3 Feed adjustment information during printing
This information is displayed when the adjustment value is specified during printing.
See “Feed Adjustment” on page 117.
4Media info
From left to right, this display shows the selected media, platen gap, media width, and media remaining.
If a media setting bank number created with this printer is selected as the print media, the number (from 1 to 30) will be
displayed. When RIP Settings is selected, 0 will be displayed.
The selected platen gap is shown as follows:
:1.5
:2.0
:2.5
The media remaining is not displayed if Off is selected for Remaining Setup in the Media Remaining menu.
See “The Media Setup Menu” on page 203.
5Ink cartridge status
Displays the approximate level of remaining ink and the current status. When ink runs low or an error occurs, the display
changes as shown below:
Normal Warning or error
1 Status indicators
The ink cartridge status is indicated as follows:
:
Ready to print. The height of the indicator changes with the level of ink remaining.
1
2